Do you have your Hisense TV screen pink and confused as to why it is so? Then, the first thing you have to check is whether the screen appears pinkish because of lines or dead pixels here and there. If you notice any of them, then your Hisense TV screen is damaged. You can fix it by repairing your TV. On the contrary, if the screen has a pink undertone and there is no damage on the screen, then other factors have caused it. This article will inform you of the potential reasons for the issue and provide essential troubleshooting tips that will help resolve it.
Reasons Why Your Hisense TV Screen is Pink
- Hisense TV Connection Problems
- Wrong Color Space Selected
- Temporary Problems in Picture Settings/TV
- Issues in HDMI Port/Cord
- Inconsistent Power Supply
- External Device Interference
- Outdated Hisense TV Firmware
- Software/Hardware Issues
The solutions for the above-mentioned factors are given in the upcoming headings.
Hisense TV Connection Problems
Hisense TV pink screen issues predominantly arise because of discrepancies in connection. Either the power cord would be in loose contact with the power source. In the worst case, the cord would be completely damaged.
Solutions: Fix Loose Connection & Cord Damage
Fix Loose Connection:
Go to the backside of your Hisense TV and take a look at the power outlet to which it is connected. It should definitely be halfway out or not connected firmly. Turn off the switch and insert it fully into the socket. After some time, turn on your Hisense TV, and you can expect the screen to be normal without the pink color.
Repair Wire Damage:
If the TV connection is fine, then the cord should be damaged. So, disconnect the cord again and inspect it thoroughly. Look for insulation damage, burns, or breakage. Also, shake the cord’s pins to see whether they are shaking or broken. If you notice any of these damages, you should repair the wire with a professional’s help. If necessary, replace the wire. With a new wire, your Hisense TV won’t show a pink screen.
Wrong Color Space Selected
Just like on the blue tint on your Hisense TV, picture settings configuration plays a major role in the pink screen issue. You might have selected the Auto mode, and it has taken up pink as the primary color tone. Maybe the picture mode you are currently in could also have some problems and have contributed to the issue. The other probabilities are Tint/Hue aspects or the Color Temperature set in the pink or red side.
Solutions: Make Changes in Picture Settings
Change Picture Mode:
Go to the Picture Settings on your Hisense TV and select Picture Mode. Check which picture mode is selected and change to other available presets. Suppose it is in Standard Mode; select any picture mode to try to fix the pink screen on Hisense TV.
Configure TV Tint/Hue & Color Temperature:
If there is no change upon changing the picture mode, then select the Color Saturation option and move its adjustment slider towards the left side to decrease its level. You will get a pinkish tone on the TV if the saturation level is set high.
Also, access Colour Gamut in the Expert Picture Setting option and fix it to the apt range. By now, the appearance of pink should be changed on the Hisense TV screen. If not, then proceed to the upcoming troubleshooting method.
Temporary Problems in Picture Settings/TV
Like the apps on your Hisense TV, some of its options can also tend to undergo issues and become corrupted. Picture Settings is also not an exception. Likewise, as you know, Hisense TVs also face some unreasonable troubles. Maybe the pink screen is also a result of this. Luckily, these are short-lived issues that can be eradicated with some simple troubleshooting methods.
Solutions: Reset Picture Settings, Restart/Power Cycle TV
Reset Picture Settings:
You have to reset the Picture Settings as there is a chance that it is corrupted. So, go to the Settings menu of your Hisense TV and select the Picture Mode Settings option. Then, click on Reset Current Mode. Now, the picture settings of your Hisense TV will be reset, and all the changes made will be undone. After that, turn off & turn on your Hisense TV once. You can expect a normal Hisense TV screen without a pink tint.
Restart/Power Cycle Hisense TV:
If resetting picture settings didn’t turn out helpful, then troubleshoot your TV. First, select the Restart option on Settings or use the Power button located on the Hisense TV unit to reboot it. Upon doing so, the troublesome bugs and glitches will be wiped out from your Hisense TV. When the TV boots up again, it will most likely be normal.
If not, then it means the problematic agents should be stubborn. So, soft resetting the TV by power cycling can work. Thus, undo your Hisense TV connection and keep it idle for 0 minutes. When you affix its cord to the respective outlet back and turn on the switch, the TV will boot up without having a pinkish shade.
Inconsistent Power Supply
If the previous scenarios don’t apply to you, then there is a high chance that your Hisense TV is not receiving an ample power supply. Either the power outlet to which it is connected must be faulty. Otherwise, the TV ambiance should have voltage fluctuations.
Solutions: Check the Power Outlet & Voltage Supply
Check the Power Outlet:
Unplug your Hisense TV cord from the power outlet. Inspect the outlet and see if it is damaged or shooked out from the wall. If yes, then you have to repair it. This impaired power outlet has caused a pink tint on your Hisense TV. It can’t transfer the required level of current properly and brings up problems with Hisense TV pictures like this. Having it in the same condition would make your Hisense TV to be on & off. So, call an electrician and ask them to repair the damaged power outlet. If they insist on a socket replacement, do it. Until then, change your Hisense TV to another location and connect it to a well-performing socket.
Resolve Voltage Supply Issues:
If the socket condition is fine, voltage fluctuations must be observed. To confirm this, check your refrigerator and see whether it is malfunctioning. If yes, then the voltage supply should be in shortage or higher. You have to stabilize it with a skilled electrician’s help. Suppose you have a slightly older Hisense TV; then get a voltage regulator from the Amazon website and connect it after the service. This will regulate the power supply and transfer only the required amount of voltage to the Hisense TV.
Issues in HDMI Port/Cord
This one is for users who are using a streaming device or DVD player by connecting it to Hisense TV. You can’t suspect only the connection and picture aspects of your TV for the pink screen issue. Maybe the input port responsible for the connection can also be a reason. In the same manner, why always the TV? Won’t there be connection issues on the external device? Possible right?
Solutions: Check out the TV Port & External Device Connection
Check out the TV Port:
Unplug the external device from the input port of your Hisense TV. Then, connect it to the alternate port and change your Hisense TV input. Doing this will likely eradicate the pink screen on Hisense TV and display the external device interface normally. If so, then it evidently shows that the particular input port of the Hisense TV is damaged or has become problematic. So, check that and repair it. Till then, continue streaming with the alternate port.
Look over Device Connection:
If the input port change didn’t help, then the connection problems have occurred on the streaming device, just as we discussed how it occurs on the TV (in the previous heading). So, check whether the streaming device is affixed well with the Hisense TV and if its cord is not damaged. If there’s something like that, repair it to fix the pink screen appearance.
External Device Interference
This is one of the overlooked factors in the issue of Hisense TV’s pink screen. If you have placed a lot of electronic devices or another Hisense TV, then its signal might interfere with that of the Hisense TV, and as a result, its screen will turn pink.
Solution: Remove Interfering Devices
Check whether heavily performing devices, like generators & microwaves, are kept near your Hisense TV. If yes, then immediately change them or your Hisense TV to another location. Don’t keep another TV near Hisense TV and free up the signal path. If real interference has caused the pink screen, then it will be rectified by now.
Outdated Hisense TV Firmware
The latest firmware is essential for Hisense TV to function optimally. If it runs outdated firmware, it will bring up issues with the Hisense TV picture quality, like pink tint.
Solution: Update Hisense TV
By tackling the pink tincture, manage to navigate to Settings. Select the System Update option and update your Hisense TV. Then, perform a reboot, and you can expect the issues to be cleared up by now. If there is still no improvement from the current situation or the TV is already running the latest firmware, then jump into the next method.
Software/Hardware Issues
If all the troubleshooting efforts you’ve put has gone in vain, then it is sure that the pink screen problem has occurred on your Hisense TV due to some serious reasons. If you are lucky enough, then it would be a software issue that is rectifiable on your own. In either situation, the internal hardware component should be impaired.
Solutions: Reset/Repair Hisense TV
Reset Hisense TV:
Resetting Hisense TV is the only possible way you can try to fix software issues. So, select the Reset to Factory Defaults/Erase Everything option from Settings. If you have the Android/Roku OS variant, use the Reset button on your Hisense TV to carry out the resetting process. After this, the Hisense TV setup screen will appear fine as the software errors are fixed.
Repair Hisense TV:
If resetting has also failed, then the internal components, either the T-Con board or the backlight of your Hisense TV are not working. So, take your Hisense TV to a nearby Hisense authorized service center for repair. Or, contact Hisense TV customer support and request a repair. If you consent to the compensation it takes, the servicemen will start the repair work. You can get the service done for free or at a low cost by claiming a warranty for your Hisense TV if valid.
After service, you won’t have a pink screen issue on Hisense TV anymore.
Ways to Prevent Pink Screen Issue on Hisense TV
- Maintain your Hisense TV connection optimally and keep the respective cords/ports free of damage.
- Ensure a stable power supply for your Hisense TV and that there is no interference from other electronics.
- Configure picture settings carefully, and don’t let red or pink color dominate the RGB values.
- Regularly update firmware and follow safe practices while cleaning your Hisense TV to prevent software & internal parts damage.
FAQ
If you have a Hisense TV red screen issue, then it has faulty cables, wrong picture settings, and outdated firmware.
