Are you someone who is planning to buy a Hisense TV and suddenly came across the Hisense Laser TV model? You are lucky to land on this blog to get to know its details. This is an all-in-all guide containing info about how a Hisense Laser TV works and its perks. Suppose you are impressed with its functioning and finally get it, you should still have this guide at your side. The procedure for Hisense Laser TV installation and setup is also available here. Scroll down a bit, and you can refer to all of them presented in an easily understandable way.
What is Hisense Laser TV?
Hisense Laser TV is nothing but a premium end product of a combination of Laser Display & Dolby Atmos audio technology, and it differs a lot from the regular TV sets that provide direct screening. Hisense TV is a combination of a projector (also called a console) and a screen. You can watch anything on-screen from the projection of an Ultra Short Throw Laser.
This technology is very similar to a theatre setup, and the sole motive of these Hisense TV models is to offer you the same experience you get at the theatre at home, be it the sound quality or visuals uncompromisingly.
Why Choosing Hisense Laser TV is Great?
- You can enjoy 4K Ultra HD streaming of content with HDR function.
- The TV has over 8 million pixels, and you can expect nothing short of a bright, smooth, and detailed picture. Thanks to the MEMC technology, it offers motion rates 10 times faster than regular Hisense TVs.
- Along with native streaming, you can also access external audio and video devices with the four HDMI ports it offers.
- You don’t have to worry about light dispersion because the X-FUSIONTM Laser light is responsible for narrow projection.
- Moreover, there won’t be unnecessary scattering from the display due to its Anti-chromatic aberration.
Essential Hardware & Tools for Hisense Laser TV Installation
Required Tools:
- Drilling machine
- Drill bit – 8mm
- Screwdriver from Philips
- Hammer
- Measuring tape
- Pencil
Hardware Components Checklist:
- M3x6 Screws – 6
- ST5.5×70 Screws – 4
- Bracket wands of 460 mm & 500 mm – 2 each
- Handles – 2
- Hanging components – 2
- Drill bolt 8×60 – 4
- Longer Outerframe – 4
- Short Outer frame – 4
- Short Fiberglass Rod – 2
- Long Fiberglass Rod – 2
- L Elow Joints – 4
- L Corner Piece – 4
- StarBright CLR Material
Step-by-Step Guidance to Install Hisense Laser TV Screen
After preparing the necessary items above, you can start the Hisense Laser TV installation using the steps below. These guidance are common for Hisense TV models of 120L5 & 120L9, 100L5 & 100L9. The process undergoes two stages. First, you have to attach its frames and assemble the screen. Then, you have to wall mount the screen compulsorily. So choose a spacious area at your home. Make sure it has a strong wall that can accommodate the large screen comfortably.
Assemble TV Screen
1. You have to assemble the peripheral components to mount the Hisense Laser TV screen. For that purpose, keep a long table or bed ready.
2. Then, start arranging the inner frame to erect the Hisense Laser screen as the first step. Take 4 long outer frames and connect them by inserting their L Conner piece with each other. Then, tighten the link using the respective screws provided with the help of a screwdriver.
3. Now, connect the short inner frame in the middle of the inner frame in the same manner.
4. Unwrap the StarBright CLR material upside down. Then, place the inner frame you have set up on it. Insert the short fiberglass rod into the space given on the sides of the StarBright CLR material.
5. Then, carefully attach the hooks of StarBright CLR material into the holes given on the short fiberglass rod.
6. Next, take the 4 outer frames and connect them to all four sides of the frame in a similar way you connected the inner frame. Tighten these frames using the suitable screws.
7. Now, lift the frame on the opposite side, and you can see the Hisense Laser TV screen is now assembled. As a next step, you have to wall mount it in order to start accessing it.
Wallmount Hisense Laser TV Screen
1. Take the measuring tape and go near the wall where you have planned to mount your Hisense Laser TV screen. Using the measuring tape, take measurements of length 2.55 m & height 2.2 m and mark them using a pencil.
2. Bring a table to place your Hisense Laser TV, and make sure it is at least 500 cm above the ground level.
3. Then, take a measurement from the table’s top for 1498 mm and mark it. Mark another spot on the same level, at its parallel end, just below the length you marked at the start.
4. Using the drilling machine, drill four holes in the four marked areas. Insert the bolts into the holes using the hammer. Then, take the hanging components, place them on the four spots appropriately, and fix them using screws.
5. Now, attach your Hisense TV screen to the hanging component carefully and ensure it is fixed well. Measure both corners of the screen and check that they are at equal levels. If there is a difference, use the bracket wands on both sides and increase the altitude by rotating anticlockwise and decrease by clockwise rotating.
6. Place your Hisense Laser TV console on the table below the screen in the center position. Then, you shall proceed to access it after the configuration.
How to Setup Hisense Laser TV & Align Screen After Installing
1. Turn ON your Hisense Laser TV and launch the Quick Settings menu using the remote control.
2. Select the Settings option and configure the WIFI connection.
3. After that, go to the System option and select the Projector Settings.
4. Choose Geometric Correction and click on Confirm.
5. Now, take your mobile phone and connect it to the same WIFI network to which your Hisense Laser TV is linked.
6. You will get on-screen instructions to align the projection to the screen exactly. Follow it and reposition the console inside the screen range. Then, click Next.
7. You’ll be displayed a QR code. Scan it using your mobile phone and tap (+) to activate the camera.
8. Take a picture of the display card that appears on the mobile screen and upload it. On the Hisense Laser TV screen, the Finished option will be prompted, indicating its setup process is over.
9. Select it, and the Hisense Laser TV Home screen will appear. You can now access apps, watch cable TV, play games, and do whatever you want, just like on any normal Smart TV, but this time with a crystal clear display.
Tips to Ease Installation of Hisense Laser TV
1. While you proceed to hang the Hisense Laser TV screen, place it on the ground straight. If the screen looks white, then you are having it upside down in the wrong position. So, turn over the screen, and if you notice it changing to black color, it is in the correct position now.
2. Use a level tool while marking the horizontal limits of the TV screen to prevent uneven positioning.
3. Always prefer installing the Hisense Laser TV by trained professionals. You can also contact Hisense TV customer support, and they’ll provide assistance in this.
4. If you are planning to do the installation by yourself, call one more person for help lifting and attaching components.
FAQ
Hisense Laser TV has two variants with VIDAA & Google Operating System.
The starting price of Hisense Laser TV is $999.88 in the USA. There are different series & models of Hisense Laser TVs available, so their prices vary accordingly.
